HIGH-RANGE WATER REDUCING, SUPERPLASTICIZING ADDITIVE "SUPERPLASTICIZER SK 1" - MTC Concrete

Packaging Packaging

200 L, 1000 L

Dosage rate Dosage rate

from 0,2 - 1,2% of the cement mass

Functions Functions

highly water-reducing, improves fluidity and fragility

Enhances Enhances

compactability and strength of concrete

Temperature range Temperature range

from 10 °C до 35 °C

Attention Attention

do not add to dry mix

Declaration (DoP) Declaration (DoP)

Download

Technical data sheet Technical data sheet

Download

MTC Concrete
Order now Send request
Available packaging and dosing
_
200 L — drum Recommended dosage: from 0.2–1.2% of the cement mass.
_
1000 L — IBC container Recommended dosage: from 0.2–1.2% of the cement mass.
Purpose

High-range water-reducing, superplasticizing admixture "Superplasticizer SK 1" – MTC Concrete is a highly effective admixture based on modified polycarboxylates with a strong water-reducing effect, designed for the production of highly workable and high-strength concrete mixes.

The admixture is used in the production of concrete mixes during the summer period when high workability in the range from P2 to P5 is required. It is also used to improve the appearance and physico-mechanical properties of concrete products, especially those with increased surface quality requirements.

Suitable for the production of ready-mix concrete, architectural concrete, pumpable concrete, reinforced concrete structures, concrete for airport and road construction, as well as high-strength concretes used in above-ground, underground and civil engineering structures.

Recommended for use at temperatures from +10 °C to +35 °C.

Properties

The mechanism of action is based on the adsorption of polycarboxylate molecules on the surface of cement particles, creating electrostatic repulsion and steric hindrance. This ensures intensive particle dispersion and significantly reduces the water-cement ratio while maintaining high workability.

Superplasticizer SK 1 MTC Concrete provides:

  • high plasticity of the concrete mix without segregation or excessive bleeding;

  • improved vibration compaction and pumpability due to reduced internal friction;

  • high workability of concrete mixes in the consistency range from P2 to P5;

  • high-quality compaction and smooth, dense concrete surfaces without pores and voids;

  • improved final compressive strength, flexural tensile strength and water impermeability;

  • enhanced frost resistance and durability;

  • cement savings of up to 20–30% without loss of design strength.

Dosage

Recommended dosage: 0.2–1.2% of the cement mass.

The optimal dosage depends on the required concrete properties and should be determined experimentally under production conditions.

Application

For optimum performance, SK 1 should be added together with the mixing water required for concrete production. Ensure thorough mixing to achieve uniform distribution of the admixture throughout the mix.

Important! Do not add directly to dry components.

Technical data

Base: modified polycarboxylates.

Colour: from transparent to light yellow.

State: liquid.

Density (at 20 ± 2 °C): 1.04 ± 0.01 g/ml.

Non-volatile content: 33 ± 2%.

pH value: 4.2–5.0.

Water-soluble chloride content: ≤ 0.10%.

Alkali content (as Na₂O): ≤ 2.5% by mass.

High-range water-reducing, superplasticizing admixture based on modified polycarboxylates by MTC Concrete. Designed for the production of highly workable and high-strength concrete mixes with consistency classes from P2 to P5, ready-mix concrete and reinforced concrete products (RCP).


Frequently asked questions
What raw materials are used in the production of this product?

Long before launching our own production in 2007, the MTC Concrete team began a thorough search for the highest quality raw material suppliers. Thanks to the extensive experience of our in-house R&D centre, we have established reliable and lasting partnerships with top-tier producers—both in Ukraine and across the EU—recognised as industry leaders.

Direct sourcing from raw material manufacturers ensures the consistent quality of MTC Concrete products, while long-term collaboration allows us to confidently refer to these companies not merely as suppliers, but as true Partners.

Where can I see customer reviews about this product?

In the B2B and B2G market segments, customer reviews are rarely published, as the dissemination of information about the approaches and results of using specific admixtures often constitutes a commercial secret.

We believe that the best testimonial for a product is a successfully implemented project where the product was used. Reports on such projects are published after completion, subject to agreement with our partners. You can find all available reports in the “Information” section, or directly under the product if there is already an applicable experience that can be shared.

What technical documentation is provided with the product?

This product is manufactured in accordance with the applicable requirements of Ukrainian legislation governing construction products and is supplied with the necessary technical documentation.

A Declaration of Performance for Construction Products (DoP) and a Technical Data Sheet (TDS) are available for this product. These documents provide information on the product's characteristics, intended use, dosage recommendations and application guidelines.

A Safety Data Sheet (SDS) can also be provided upon request. It contains information regarding the safe handling, transportation and storage of the product.

To learn more about Declarations of Performance, Technical Data Sheets, SDS documentation and other related documents, read our article: "Technical Documentation for Concrete Admixtures in Ukraine: What Manufacturers Should Provide?".

The product is manufactured at a facility operating a quality management system that complies with the requirements of ISO 9001:2015.

Is it possible to get a free consultation on this product?

Of course, you can get a free preliminary consultation either at the office of the "Koalida" company or fill out a request via the form on the Contacts page. You can also get advice from a technical specialist by calling the phone number: 077-500-11-00.

In our product range you will find solutions for almost any type of concrete mixtures and mortars that meet all quality and reliability requirements.

Security code
Cooperation benefits
Raw materials from the EU
On the market since 2006
Individual approach
Own R&D center
Do you need advice or technical support?