PLASTICIZING, WATER-REDUCING ADMIXTURE "ADDITIVE FOR VIBROPRESSED PRODUCTS N 2" – MTC CONCRETE - MTC Concrete

Packaging Packaging

200 L, 1000 L

Dosage rate Dosage rate

from 0,2 - 0,8% of the cement mass

Functions Functions

high-range plasticizing/-water-reducing admixture

Enhances Enhances

compactability and strength of concrete

Temperature range Temperature range

from 5 °C до 30 °C

Attention Attention

do not add to dry mix

Declaration (DoP) Declaration (DoP)

Download

Technical data sheet Technical data sheet

Download

MTC Concrete
Order now Send request
Available packaging and dosing
_
200 L — drum Recommended dosage: from 0.2 - 0.8% of the cement weight.
_
1000 L — IBC container Recommended dosage: from 0.2 - 0.8% of the cement weight.
Purpose

Plasticising, water-reducing admixture for vibro-pressed concrete products N 2 – MTC Concrete is an admixture based on modified lignosulphonates for stiff and semi-dry concrete mixes used in the manufacture of vibro-pressed concrete products.

The N 2 admixture improves concrete compaction, enhances product formation and contributes to improved physical and mechanical performance of finished concrete elements.

N 2 admixture for vibro-pressed products by MTC Concrete is used in the production of vibro-pressed concrete products made from stiff and low-slump concrete mixes. Suitable for the manufacture of ready-mix concrete, paving slabs, block paving, kerbs, concrete blocks, landscaping elements and similar products.

Designed for use at temperatures from +5 °C to +30 °C.

Properties

The mechanism of action is based on the dispersion of cement particles and the reduction of water surface tension, ensuring more effective wetting of concrete mix components and reduced water demand while maintaining the required processing characteristics.

The use of N 2 provides:

  • reduced water-cement ratio of concrete mixes;

  • improved compaction of stiff and semi-dry concrete mixes during vibro-pressing;

  • increased early and ultimate strength of concrete products;

  • improved shaping and dimensional accuracy of finished products;

  • reduced number of surface defects, pores and voids;

  • more uniform colouring of coloured concrete products;

  • improved surface quality of vibro-pressed concrete elements.

Dosage

Recommended dosage: 0.2 - 0.8% of the cement weight.

The optimum dosage depends on the required concrete properties and should be determined through site trials.

Application

For optimum performance, the N 2 admixture should be added together with the mixing water required for concrete production. Ensure uniform distribution of the admixture through adequate mixing. Important! Do not add to dry components!

Technical data

Base: modified lignosulphonates.

Colour: brown.

State: liquid.

Density (at 20 °C): 1.16 ± 0.01 g/ml.

Non-volatile content: 35 ± 2%.

pH value: 3.8 - 4.8.

Chloride content: ≤ 0.10% by weight.

Alkali content (as Na₂O): ≤ 2.5% by weight.

Plasticising, water-reducing admixture by MTC Concrete for vibro-pressed concrete products. Improves the compaction of stiff and semi-dry concrete mixes, enhances product formation and contributes to higher strength and improved surface quality.


Frequently asked questions
What raw materials are used in the production of this product?

Long before launching our own production in 2007, the MTC Concrete team began a thorough search for the highest quality raw material suppliers. Thanks to the extensive experience of our in-house R&D centre, we have established reliable and lasting partnerships with top-tier producers—both in Ukraine and across the EU—recognised as industry leaders.

Direct sourcing from raw material manufacturers ensures the consistent quality of MTC Concrete products, while long-term collaboration allows us to confidently refer to these companies not merely as suppliers, but as true Partners.

Where can I see customer reviews about this product?

In the B2B and B2G market segments, customer reviews are rarely published, as the dissemination of information about the approaches and results of using specific admixtures often constitutes a commercial secret.

We believe that the best testimonial for a product is a successfully implemented project where the product was used. Reports on such projects are published after completion, subject to agreement with our partners. You can find all available reports in the “Information” section, or directly under the product if there is already an applicable experience that can be shared.

What technical documentation is provided with the product?

This product is manufactured in accordance with the applicable requirements of Ukrainian legislation governing construction products and is supplied with the necessary technical documentation.

A Declaration of Performance for Construction Products (DoP) and a Technical Data Sheet (TDS) are available for this product. These documents provide information on the product's characteristics, intended use, dosage recommendations and application guidelines.

A Safety Data Sheet (SDS) can also be provided upon request. It contains information regarding the safe handling, transportation and storage of the product.

To learn more about Declarations of Performance, Technical Data Sheets, SDS documentation and other related documents, read our article: "Technical Documentation for Concrete Admixtures in Ukraine: What Manufacturers Should Provide?".

The product is manufactured at a facility operating a quality management system that complies with the requirements of ISO 9001:2015.

Is it possible to get a free consultation on this product?

Of course, you can get a free preliminary consultation either at the office of the "Koalida" company or fill out a request via the form on the Contacts page. You can also get advice from a technical specialist by calling the phone number: 077-500-11-00.

In our product range you will find solutions for almost any type of concrete mixtures and mortars that meet all quality and reliability requirements.

Security code
Cooperation benefits
Raw materials from the EU
On the market since 2006
Individual approach
Own R&D center
Do you need advice or technical support?