PLASTICIZING, WATER-REDUCING ADMIXTURE "PLASTICIZER NK 2" - MTC Concrete

Packaging Packaging

200L, 1000 L

Dosage rate to +5°C Dosage rate to +5°C

0,4 – 0,8% of the cement mass

Dosage rate to -5°C Dosage rate to -5°C

0,8 – 1,2% of the cement mass

Dosage rate to -8°C Dosage rate to -8°C

1,2 - 1,6% of the cement mass

Functions Functions

plasticizing, water-reducing

Accelerates Accelerates

the setting kinetics

Declaration (DoP) Declaration (DoP)

Download

Technical data sheet Technical data sheet

Download

MTC Concrete
Order now Send request
Available packaging and dosing
_
200 L — drum Recommended dosing: from 0.4 - 1.6% of the cement mass.
_
1000 L — IBC container Recommended dosing: from 0.4 - 1.6% of the cement mass.
Purpose

Plasticising, water-reducing admixture with set acceleration "Plasticizer NK 2" - MTC Concrete (brand "MTC Concrete") is a highly effective admixture based on modified lignosulphonates with plasticising properties. It reduces the water demand of the concrete mix, shortens the retention time of initial workability and accelerates setting and early strength gain.

The NK 2 additive from MTC Concrete is used for:

  • production of reinforced concrete products by any method with early formwork removal, including pre-stressed concrete products;

  • production of ready-mix concrete for construction in low ambient temperatures (from +15 °C to -8 °C);

  • production of waterproof concrete resistant to frost and salts;

  • improvement of the physical and mechanical properties of concrete, particularly when stable early strength gain is required at low temperatures.

Plasticising admixture with set acceleration NK 2 - MTC Concrete enhances the properties of both fresh and hardened concrete.

Properties

The NK 2 plasticising admixture from MTC Concrete imparts workability to freshly mixed concrete, which in turn allows for increased consistency or reduced water demand to improve compressive or flexural tensile strength, and provides the following benefits:

  • increased ease of placement of concrete mixes;

  • reduced processing time at the construction site due to accelerated hydration processes;

  • reduction in time and lower temperature during thermal treatment;

  • effective use of concrete mixes when pumped by concrete pumps;

  • reduced risk of water freezing in freshly placed concrete;

  • improved frost resistance and water resistance of concrete;

  • increased early and final strength;

  • cement savings of up to 10% compared to the initial non-admixture formulation.

Dosage

Recommended dosage: 0.4 - 1.6% of the cement mass.

+15°C to +5°C: 0.4 – 0.8% of the cement mass
+5°C to -5°C: 0.8 – 1.2% of the cement mass
-5°C to -8°C: 1.2 - 1.6% of the cement mass

The optimum dosage depends on the required properties of the concrete and is determined experimentally.

Application

Important! Do not add to dry concrete mix!

Technical data

Base: modified lignosulphonates.

Colour: brown.

State: liquid.

pH value: 4.8 - 6.3.

Density (at 20°C): 1.22 ± 0.01 g/ml.

Mass fraction of non-volatile substances: 38 ± 2%.

Chloride content: ≤ 0.10% by weight.

Alkali content, expressed as Na₂O: ≤ 7.5% by weight.

Plasticising, water-reducing admixture with set acceleration from the MTC Concrete brand. Reduces the water demand of concrete mixes, accelerates setting and early strength gain, and shortens the retention time of initial workability.


Frequently asked questions
What raw materials are used in the production of this product?

Long before launching our own production in 2007, the MTC Concrete team began a thorough search for the highest quality raw material suppliers. Thanks to the extensive experience of our in-house R&D centre, we have established reliable and lasting partnerships with top-tier producers—both in Ukraine and across the EU—recognised as industry leaders.

Direct sourcing from raw material manufacturers ensures the consistent quality of MTC Concrete products, while long-term collaboration allows us to confidently refer to these companies not merely as suppliers, but as true Partners.

Where can I see customer reviews about this product?

In the B2B and B2G market segments, customer reviews are rarely published, as the dissemination of information about the approaches and results of using specific admixtures often constitutes a commercial secret.

We believe that the best testimonial for a product is a successfully implemented project where the product was used. Reports on such projects are published after completion, subject to agreement with our partners. You can find all available reports in the “Information” section, or directly under the product if there is already an applicable experience that can be shared.

What technical documentation is provided with the product?

This product is manufactured in accordance with the applicable requirements of Ukrainian legislation governing construction products and is supplied with the necessary technical documentation.

A Declaration of Performance for Construction Products (DoP) and a Technical Data Sheet (TDS) are available for this product. These documents provide information on the product's characteristics, intended use, dosage recommendations and application guidelines.

A Safety Data Sheet (SDS) can also be provided upon request. It contains information regarding the safe handling, transportation and storage of the product.

To learn more about Declarations of Performance, Technical Data Sheets, SDS documentation and other related documents, read our article: "Technical Documentation for Concrete Admixtures in Ukraine: What Manufacturers Should Provide?".

The product is manufactured at a facility operating a quality management system that complies with the requirements of ISO 9001:2015.

Is it possible to get a free consultation on this product?

Of course, you can get a free preliminary consultation either at the office of the "Koalida" company or fill out a request via the form on the Contacts page. You can also get advice from a technical specialist by calling the phone number: 077-500-11-00.

In our product range you will find solutions for almost any type of concrete mixtures and mortars that meet all quality and reliability requirements.

Security code
Cooperation benefits
Raw materials from the EU
On the market since 2006
Individual approach
Own R&D center
Do you need advice or technical support?